Optical contact angle measuring instrument is mainly used to measure the contact angle of liquid to solid, that is, the wettability of liquid to solid. It can measure the contact angle of various liquids to various materials.in order to ensure the life of the optical contact angle measuring instrument and the accuracy of the measurement data, we should understand the main matters of its maintenance and maintenance when using it.

Optical contact angle measuring instruments can be used to: measure the wettability of photoresist, wafers, photovoltaics, plastics, glass, ceramics, wood, paper, metal and other materials, analyze surface cleanliness, quality assurance of activation processes, such as Test the effect of plasma treatment, test the effect of hydrophobic coatings and other coatings, and more.

Optical contact angle measuring instrument application range

Precautions for maintenance of optical contact angle measuring instrument:

Components of Sindin Precision Optical Contact Angle Measuring Instrument

Components of Sindin Precision Optical Contact Angle Measuring Instrument:

1. Adjust the level of the optical contact angle measuring instrument and place it on a level table;

2. The optical contact angle measuring instrument should be placed in a clean and dry room to avoid surface contamination of optical parts, rust of metal parts, and dust and debris falling into the moving guide rail, which will affect the performance of the instrument;

3. After use, the working surface should be wiped clean at any time, and then covered with a dust cover to prevent dust from falling on the lens or other instrument parts to affect the effect;

4. The transmission mechanism and motion guide rail of the optical contact angle measuring instrument should be lubricated regularly to make the mechanism move smoothly and maintain a good working condition;

5. Regularly check the condition of the automatic rotating platform of the optical contact angle measuring instrument, the condition of the sample platform and the wear of each component, measure and adjust the fitting clearance of each component, and the bolt tightening condition of each part;

6. Precision components, such as imaging system, worktable and transmission mechanism, need to be precisely adjusted. All adjustment screws and fastening screws have been fixed. Do not disassemble without authorization. If there is any problem, please notify the manufacturer to solve it;

7. The measurement software on the computer, please do not change the parameter configuration by yourself, otherwise, wrong measurement results will be produced.

Sindin Precision has already answered the above questions about how to maintain the optical contact angle measuring instrument. When you use it, you can extend the service life of the product and ensure the accuracy of the measurement data by paying attention to the points listed above.